Anticorrosion

We offer a wide range of services and techniques to ensure perfect anti-corrosion protection.

Impact and shrinking abrasion

Flexible, urethane ceramic composite, wear-resistant for impact and abrasion applications.

TECHNICAL DETAILS

• Minimum film thickness 3 mm

• Anti-wear ceramic epoxy composite for moderately to extreme abrasion applications

• Minimum film thickness 6 mm

• Anti-wear ceramic epoxy composite for lightweight to moderate abrasion applications

• Low levels of siliceous contaminants

• Anti-wear ceramic epoxy composite for extreme-sanding abrasion applications with acid exposure

Corrosion-induced flow

To combat corrosion-induced flow. Composite anti-erosion / corrosion.

 

TECHNICAL DETAILS

  • Certified for Drinking Water
  • Can be applied by brush, roller and/or spray
  • Certified coating for immersion
  • Composite anti-erosion / corrosion for high temperatures
  • Low permeability in water based solutions
  • Composito resistente ad erosione/corrosione/sostanze chimiche
  • Low permeability in diluted acids
  • Material for reconstructing and leveling
  • Non dripping, suitable for vertical applications

Exposure and corrosion

Coating for general use.

 

TECHNICAL DETAILS

• Extremely low permeation levels

• High adhesion

• Coating certified for immersion

• Epoxy composite suitable for erosion / corrosion exposures with diluted caustic substances and acids

• Low permeability coating for aggressive erosion / corrosion exposures

• Suitable for diluted caustic substances and acids

• Reinforced immersion coating for high temperature alkaline exposures

• Immersion coating for extreme acid exposure

• Coating for exposure to acid gases corrosive exposure at high temperature

Repairs and restoration

For emergency repairs and restoration of surfaces. Composite for emergency repairs fast-paced (from 5 to 10 minutes). NON DRIPPING.

 

TECHNICAL DETAILS

• Wear resistant; Applicable with spatula

• Polymerizes underwater

• Machinable with minimum tolerances

• Thixotropic paste that does not drip

• Composite anti-wear to rapid polymerization

• Polymerizes in 10 minutes; Ready to be put into service in 1 hour

• Minimum film thickness 3 mm

ARE YOU INTERESTED IN OUR SERVICES?
CONTACT US AND WE’LL GET BACK TO YOU

CONTACT US